Wujiang Xinhu Textile co.,Ltd.
Sunseashell® Acrylic Fabric: A Practical Guide to Performance and Outdoor Uses
10/24/20262 min read
Sunseashell® Fabric at a Glance
Sunseashell® is a woven acrylic fabric designed for demanding outdoor applications. With a finished width of 46 inches and an approximate weight of 9.25 ounces per finished square yard, it offers a balanced combination of coverage, manageability, and durability. The fabric is produced from woven acrylic and finished with a fluorocarbon coating, helping it resist water and perform reliably in changing outdoor conditions.
The material is available in approximately 54 solid colors and 65 stripe options. The color on the underside is the same as the top, creating a consistent appearance when the fabric is viewed from either side. Depending on the selected color, Sunseashell® may range from opaque to translucent, so choosing a sample is recommended when light control and privacy are important.
Strength, Weather Resistance, and Protection
Sunseashell® is engineered for use in outdoor environments where fabric strength matters. Its listed tongue tear strength is 16 by 11.1 pounds, while grab tensile strength is rated at 257 by 158 pounds. These figures indicate that the material can withstand the pulling and handling associated with covers, awnings, and fitted outdoor assemblies when it is properly fabricated and installed.
The fabric is water repellent and mildew resistant, two characteristics that make it suitable for exposure to moisture and humid conditions. Its hydrostatic resistance is listed at 38 centimeters. Sunseashell® has no stated shrinkage factor, which can simplify planning for cutting and fabrication. It is also heat sealable when used with seam-seal tape, supporting the creation of more weather-resistant seams and finished edges.
The fabric is not listed as meeting a specific flame-retardant standard or government specification. For projects that require compliance with particular regulations, buyers should confirm the applicable requirements before ordering or beginning fabrication.
Recommended Applications
Sunseashell® has a primary end use in awnings, where its broad color selection and outdoor-oriented finish provide flexibility for both residential and commercial designs. It is also suitable for boat tops, protective covers, and outdoor furniture applications. These uses benefit from the fabric’s water repellency, mildew resistance, and available strength.
For boat tops and covers, fabricators should pay close attention to pattern layout, reinforcement points, and seam construction. Heat sealing with compatible seam-seal tape can help improve protection at vulnerable joins. Outdoor furniture projects may also benefit from selecting an appropriate color and confirming whether the desired appearance calls for an opaque or more translucent option.
Handling, Availability, and Warranty
Sunseashell® is listed with a put-up of approximately 60 rolls and 360 cartons. This packaging information can help distributors and project planners estimate storage and ordering needs. Before placing a large order, confirm current availability, color selection, roll dimensions, and shipping details with the supplier.
The listed warranty is five years. Warranty coverage may depend on proper use, fabrication, installation, care, and environmental exposure. As with any outdoor textile, regular cleaning and correct installation can help preserve appearance and performance. Sunseashell® offers a practical fabric option for awnings, boat tops, covers, and outdoor furniture when its specifications align with the project’s performance requirements.