Wujiang Xinhu Textile co.,Ltd.
Sens Outdoor Upholstery Fabric: Performance, Care, and Technical Details
11/16/20265 min read
Sens is a soft upholstery fabric developed for use in both indoor and outdoor settings. Its hand and appearance make it suitable for furniture where comfort and visual appeal matter, while its fiber composition is intended to support use in exposed environments. Sens is made from 100% solution-dyed acrylic. In this process, color is incorporated into the acrylic fibers during production rather than applied only to the finished fabric surface. This construction helps the material resist color fading from sunlight, although actual performance can vary with exposure, maintenance, and installation conditions.
The fabric is specified for a broad range of residential and commercial applications. Potential uses include upholstered furniture in homes, hospitality or other contract projects, and marine upholstery. It can also be used for cushions and pillows, as well as umbrellas. These applications may involve different levels of sunlight, moisture, abrasion, and handling, so the appropriate fabric choice should be considered in relation to the demands of each setting. A product’s stated uses indicate intended applications; they do not replace project-specific review of construction, performance needs, and care requirements.
Sens has a nominal width of 55 inches, with a stated tolerance of ±1%. Its listed fabric weight is 7.9 ounces per square yard, with a tolerance of ±5%, and the listed roll length is 65.6 yards. These specifications can assist with estimating material requirements and planning upholstery work, but finished dimensions and usable yield may depend on pattern placement, seams, cutting direction, and the shape of the furniture or accessory. Before ordering, confirm the current product details and calculate quantities with an appropriate allowance for fabrication and waste. Suitability for any residential, commercial, marine, or outdoor project ultimately depends on its specific conditions and the applicable performance, safety, and regulatory requirements.
Sens outdoor upholstery fabric is treated with PFAS-free Infinity technology, which is stated to help repel water and dirt while preserving the material’s breathability. This treatment supports day-to-day use in outdoor settings, but water repellency should not be confused with waterproofing. The published water-column result is 250 mm / 24.5 mbar, and the spray-test result is 100 under AATCC 22. These figures describe performance under specified test methods; they do not mean the fabric will prevent all water penetration in every condition, such as prolonged exposure or standing water.
The fabric is also described as resistant to mold, mildew, rot, pilling, stains, sunlight, and salt water. These properties can help it withstand common sources of wear on patios, boats, and other exterior settings. Resistance does not make the upholstery impervious to damage: exposure duration, cleaning practices, installation, and surrounding conditions may affect how it performs over time. Promptly removing spills and following the manufacturer’s care guidance remain sensible steps for maintaining appearance and service life.
Reported colorfastness results provide additional information about color stability. The indoor rating is 4–5 under UNE-EN ISO 105 B02:2014, while the outdoor rating is 7–8 under UNE-EN ISO 105 B04:1998. Sens also reports a pass under UV Standard 801. These standardized results indicate performance in the relevant tests, rather than a promise that color will never change after long-term exposure to sunlight or weather. In laboratory testing, antimicrobial activity was reported as up to 99.99% reduction in bacterial growth. This is a test result under laboratory conditions, not a guarantee of equivalent reduction in everyday use or protection against infection. Taken together, the stated results describe a fabric designed for outdoor demands, while leaving room for normal wear and environmental variation.
Sens outdoor upholstery fabric is associated with multiple published durability figures, but they should not be treated as interchangeable. The product page reports 50,000 abrasion cycles without identifying the test method. Separately, the June 2024 technical sheet for the solids and textured range reports 40,000 Wyzenbeek cycles tested under ASTM D4157. These are distinct published results, and the manufacturer has not confirmed that they are equivalent or directly comparable. The test method and source should therefore be considered when interpreting abrasion performance.
The same technical sheet gives strength results for the solids and textured range. Under ASTM D5034, reported tensile strength is 317 lbf in the warp direction and 162 lbf in the weft direction. Tear strength under ASTM D2261 is listed as 20.0 lbf warp and 12.9 lbf weft. The sheet states a ±5% tolerance for these figures. It also notes that technical-sheet values are averages with a ±5% tolerance unless otherwise stated, so individual production results may vary within that range.
For fire-related testing, the manufacturer reports a pass under California TB 117-2013 and a UFAC Class I result. These are specific reported test outcomes; they should not be interpreted as proof that the fabric meets every fire, building, or furniture requirement in every jurisdiction. Buyers and specifiers should verify applicable regulations and confirm that the selected construction and end use are covered by the relevant documentation.
The manufacturer’s technical sheet also shows OEKO-TEX Standard 100 and REACH, and describes the fabric as phthalate-free and recyclable, with manufacture in Europe. These details provide information about stated material and production attributes, but do not replace review of current certificates, scope, or local requirements. Where a specification is being prepared, consult the latest technical documentation for the exact colorway and construction: the cited test values apply to the solids and textured range where indicated, and published averages and certifications may have defined coverage. Keeping the abrasion figures separate, and checking the stated test methods and tolerances, supports a more accurate assessment of suitability for outdoor upholstery applications.
Sens outdoor upholstery fabric is described as bleach-friendly, which may make routine care and some stain treatments more manageable. However, that description should not be treated as permission to use any bleach product, concentration, or cleaning method. Always follow the manufacturer’s care instructions, and check the guidance for the specific fabric and stain before applying a treatment. Test an appropriate cleaning method on an inconspicuous area where recommended, and avoid assuming that advice for one upholstery fabric applies to another.
The fabric carries a five-year manufacturer warranty, subject to the warranty’s terms, conditions, and exclusions. Coverage may depend on factors such as the product selected, its intended use, installation, and care, so buyers should read the complete warranty rather than relying on the headline duration alone. Review the technical documentation as well, particularly when the fabric is being specified for a commercial, contract, or otherwise regulated project. If an application has defined performance requirements, confirm that the relevant product data and warranty provisions apply to that use.
Before choosing a fabric, consider where and how it will be used. A practical checklist includes whether the installation will face indoor or outdoor exposure; how much abrasion, handling, and cleaning it is likely to experience; and whether the project has specific fire-safety or other compliance requirements. Also decide whether water repellency meets the need or whether the project requires waterproof performance. These are different expectations, and water-repellent upholstery should not automatically be treated as waterproof.
Published test results can help compare options and provide useful technical context, but they do not by themselves confirm suitability for every project. Check the test methods, conditions, and product details, then verify the intended application with the manufacturer or project specifier before ordering. This final review helps align care expectations, warranty coverage, and performance requirements with the actual installation.